“As the leading manufacturer of marine foam filled fenders, Ron-guard type foam filled fenders perform well in the marine and oil industry. Ron-Guard netless foam filled fenders is one kind tough heavy-duty floating fendering system for harbor, offshore and ship-to-ship application. Ron-Guard foam filled fenders are able to absorb 40% more energy than similar sized pneumatic rubber fenders, with relatively gently reaction force as comparing with other marine fendering systems”

                                                                Foam Filled Fenders Advantages

Ron-Guard netless type foam filled fenders are constructed with closed-cell, energy absorbing resilient foam laminated layers, nylon filament reinforced, tough polyurethane skin. This construction offers a number of important features and advantages.

• High energy absorption with low reaction force

Ron-guard foam fenders have both high energy absorption and low reaction force Reaction forces at rated compressions are lower than most other floating fenders at comparable energy levels. The low reaction force of the Ron-guard foam filled fender is an important consideration in the design of quay walls, where significant economies can be made if forces on the walls can be kept to a minimum. Other economies are produced by eliminating the need for load-spreading panels, which are required for most large hard rubber fenders.  Ronsen Marine foam filled fenders dissipate a significant portion of energy internally and do not cause the vessel to rebound from the berth as readily as pneumatic or hard rubber fenders.

• Tough Outer Skin

Ron-guard foam filled fenders have a rugged polyurethane elastomer outer skin, with nothing to snag hull protrusions or dock fittings. To provide added strength, the thick skin is reinforced with nylon filaments.

Formulated by Ronsen Engineering team for marine fenders, the skin undergoes strict quality control at Ronsen Marine factory.

• Custom sizes and colors

• Laboratory and field tests

Ronsen guard type netless foam fenders have been extensively tested to verify their performance, ruggedness and durability. Compression tests are conducted in a certified laboratory on sizes up to 2.0 m x 4.0 m, using the 3,000 tons Chinese largest compression testing machines. These foam filled fenders consistently excel in all other required tests, including energy absorpotion, capacity and reaction forces; ultimate compression; cyclic compression (dynamic and sustained loading); transverse pull tests; and longitudinal pull tests.

Guard Netted Foam Fenders Specification

Ron-Guard Type Netted Foam Filled Fenders are normally supplied with standard capacity. Low reaction capacity, or high capacity also are available upon clients’ request.